Certified Company
-
-
Opening Hours
Mon-Fri 8am - 5pm
Opening Hours
| Rod D1Ø | 14MM | 0.55" | |
|---|---|---|---|
| Cylinder D2Ø | 28MM | 1.10" |
| Stroke lengths (S): | 20-800MM | 0.79" - 31.50" | |
|---|---|---|---|
| Extended length EL1: | Stroke (S)*2 +59MM | 2.32" | shortest possible |
| Extended length EL2: | Stroke (S)*2 +59MM | + connecting parts |
| Force (F1) range: | 100-2600N | 22.50-585Lbs |
|---|
| Rod: | QPQ | ||
|---|---|---|---|
| Cylinder: | Black |
| Damping: | Normal/No/Increased | ||
|---|---|---|---|
| Speed: | Normal/Slow/Fast | ||
| Working temperature: | -35°C +90°C | -31°F +194°F | |
| Progression ( approx.): | 52% |
| Part # 806 | Threaded ends M8x1.25 | ||
|---|---|---|---|
|
|
L: 11MM | 0.43" |
| Extended length (EL): Stroke (S)*2 +59MM/2.32" ( shortest possible ) |
| Part # 807 | Threaded ends M10x1.50 | ||
|---|---|---|---|
|
|
|
L: 11MM | 0.43" |
| Extended length (EL): Stroke (S)*2 +59MM/2.32" ( shortest possible ) |
| Part # 816 | Eye ends E10 | ||
|---|---|---|---|
|
|
A: M10x1.50 B: Ø8.1MM C: 19MM D: 25MM E: 10MM |
0.319" 0.75" 0.98" 0.39" |
| Extended length (EL): Stroke (S)*2 +109MM/4.29" ( shortest possible ) |
| Part # 816ZA | Eye ends Zamak | ||
|---|---|---|---|
|
|
A: M8x1.25 B: Ø8.1MM/0.32"; Ø10.1MM/0.40"; Ø12.1MM/0.48" C1: 19MM C2: 13MM D: 16MM E: 12MM |
0.75" 0.51" 0.63" 0.47" |
| Extended length (EL): Stroke (S)*2 +91MM/3.58`" ( shortest possible ) |
| Part # 826 | Clevis ends C10 | ||
|---|---|---|---|
|
|
d2: M10x1.50 d1: Ø10MM B: 10MM G: 20MM L1: 52MM L2: 40MM |
0.39" 0.39" 0.79" 20.05" 1.58" |
| Extended length (EL): Stroke (S)*2 +139MM/5.47" ( shortest possible ) |
| Part # 835 | Angle ball joint ends A8 | ||
|---|---|---|---|
|
|
d2: M8x1.25 d2/1: M8x1.25 a: 30MM d1: ball Ø13MM L2: 16.5MM |
1.18" 0.65" |
| Extended length (EL): Stroke (S)*2 +119MM/4.69" ( shortest possible ) |
| Part # 835.3 | Angle ball joint ends A8IN | ||
|---|---|---|---|
|
|
|
d2: M8x1.25 d2/1: 5/16-18UNC a: 30MM d1: ball Ø13MM L2: 16.5MM |
1.18" 0.65" |
| Extended length (EL): Stroke (S)*2 +119MM/4.69" ( shortest possible ) |
| Part # 836 | Angle ball joint ends A10 | ||
|---|---|---|---|
|
|
|
d2: M10x1.50 d2/1: M10x1.50 a: 35MM d1: ball Ø16MM L2: 20MM |
1.38" 0.79" |
| Extended length (EL): Stroke (S)*2 +129MM/5.08" ( shortest possible ) |
| Part # 836.10 | Angle ball joint ends A10IN | ||
|---|---|---|---|
|
|
|
d2: M10x1.50 d2/1: 3/18"-16UNC a: 35MM d1: ball Ø16MM L2: 20MM |
1.38" 0.79" |
| Extended length (EL): Stroke (S)*2 +129MM/5.08" ( shortest possible ) |
| Part # 865 | Metal ball socket ends B40 | ||
|---|---|---|---|
|
|
d2: M10x1.50 a: 35MM d1: ball Ø16MM |
1.38" |
| Extended length (EL): Stroke (S)*2 +129MM/5.08" ( shortest possible ) |
| Part # 867 | Rod end bearing ends RB10 | ||
|---|---|---|---|
|
|
d3: M10x1.50 L1: 43MM d1: Ø10MM L2: 28MM |
1.69" 0.39" 1.10" |
| Extended length (EL): Stroke (S)*2 +145MM/5.71" ( shortest possible ) |
Options: |
|||
|---|---|---|---|
| - Reducible force: | V |  |
|
| - Dust boot: | D |  |
|
| - Rod protector: | R |  |
Stroke reduction 5MM |
| - Lockable protector: | L |  |
Stroke reduction 5MM |
| - Horizontal use: | H |  |
EL1/EL2 increase |
| - Low temperature -45°C / -49°F | A | ||
| - High temperature 200°C / 392°F | B | ||
| - No end fittings: |  |
||
| - Private label | P |
|
|
|||
| Product Inquiry example: | |||
| Part # | Stroke (S) MM/INCH | Length (EL2) MM/INCH | Force N/Lbs | Damping | Speed | Working temp | Options |
|---|---|---|---|---|---|---|---|
| 816 | 250 / 9.84 | 609 / 23.98 | 1555N / 350Lbs | Normal | Normal | Normal |
| Extended length (EL) of a gas compression spring is calculated when piston rod is fully extended |
| Force (F1) measured with piston rod 5MM/ 0.20" compressed |
| Progression rate will change depending on cylinder volume |
| Connecting parts are interchangeable, make your own combination or go to product category connecting parts to view more options |
| Please be advised that Extended Length EL2 will change depending on your choice of connecting parts |
For business inquiries please fill in the form below, or give us a call. We will contact you shortly.